10/11/17
Today we attached the lifting arm to the robot. We filled down the sharp edges as we attached it. We began
working on the drawer slides so we can lift the arm.
10/10/17
We continued working on the lifting arm. We tried to find a good place on the robot to place the arm. We
started building a good place to place the arm on the robot so it can work correctly.
10/4/17
Today we worked on a robot for the coders, we made the robot a lot smaller but it can be used by the coders
to code the robot. This is also a practice robot before we finish the actual robot.
10/3/17
Today we continued working on the arm for competitions. We began to strip apart the robot from the freshman
activity fair. We took off everything besides the chassis. We let the freshman go through tutorials for code
and we helped them through all the basics that they would need to know before they start coding the robot.
If you want to sponsor us, you can start here!